Innovative Technology for Drinks Producers
*All images shown are for illustration purposes only. Actual product may vary.


A fermenter is designed specifically for the fermentation of beer. Wort (heated grains, malts, and hops) is poured or siphoned into the tank after cooling to begin fermentation. Sediment collects in the 60° conical-shaped bottom and can be easily discharged.

The CBEFT range of fermenters has a holding capacity of up to 6000 litres, is constructed from durable materials with a polished or electropolished finish, and is fully equipped with CIP spray ball, butterfly valve, sampling tap, and safety valve. Fermenters feature a large, dimpled cooling jacket for temperature optimisation, as well as pressure-rated temperature control. Cooling capacity, insulation and pressure can be tailored according to specific requirements.

Other sizes are available on request.

Main Features
  • Interior Shell: SUS304 full welded; TH=3mm/4mm.
  • Exterior Shell: SUS304 full welded; TH=2mm.
  • 100% TIG welding with pure argon gas shield.
  • Interior Finish: Sanitary 2B finish, pickled and passivated; (8K mirror finish optional).
  • Exterior Finish: Oil brushed finish (2B, 8K mirror finish optional).
  • Interior full polished to 0.2~0.4 μm without dead corner.
  • Insulation: TH=80mm/100mm with low thermal conductivity PU.
  • Cooling: 35% Glycol liquid -5℃.
  • Cooling Jacket: Dimple plate on bottom and side wall, welded without over burning.
  • Jacket test by water and gas, 5bar/75psi for 1hour, 3.5bar/52psi for 48 hours.
  • Jacket Working Pressure: < 2bar/30psi.
  • Tank leakage test by water and gas, 4bar/60psi for 1hour, 2.5bar/37.5psi for 48 hours.
  • Tank Working Pressure: ≦ 2bar/30psi.
  • Dished top full polished indoor design (insulated conical top for outdoor as optional).
  • Conical bottom with 60° cone (customizable).
  • Sanitary side/top mounted oval manhole with pressured door (top mounted available).
  • Top mounted double clamp 360° rotary CIP spraying ball and port, 1pc.
  • CIP arm with four-way connection and butterfly valve.
  • CO2 blow-off arm with butterfly valve (removable).
  • Mechanical safe valve PVRV 2bar/30psi on top (1bar/15psi available).
  • Full sanitary sampling valve with EPDM seal.
  • Hydraulic shock pressure gauge on CIP arm (diaphragm type for optional).
  • Horizontal mounted rotating racking arm and port in cone with butterfly valve.
  • Discharge arm with butterfly valve – removable and easy to clean.
  • Sanitary welded thermowell for high accuracy temperature sensor 1pc.
  • Dry hopping port 4” with solid end cap (hops pitching tank for optional).
  • Glycol water in/out port on side wall, thick wall pipe thread (top or bottom design available).
  • Glycol water in/out port on cone, thick wall pipe thread (top or bottom design available).
  • 4pcs completely 304SS legs with reinforced braces.
  • 4sets heavy duty foot pad with up-down and slope adjustable.
  • Complete valves, fittings and all parts, Tri clamp/DIN union available.
Capacity: Up to 200 litres Up to 500 litres Up to 1000 litres Up to 2000 litres Up to 3000 litres Up to 4000 litres Up to 5000 litres Up to 6000 litres
Dimensions (øxH): 810 mm x 1800 mm 960 mm x 1950 mm 1210 mm x 2200 mm 1560 mm x 2490 mm 1760 mm x 2860 mm 1760 mm x 3460 mm 1760 mm x 4060 mm 1960 mm x 3770 mm
**Product specification may vary due to enhancement by the manufacturer, choice of optional extras, display stands not included or otherwise. Information is regularly updated by our manufacturing partners and is therefore subject to change without notice.
Fermenter Tanks

Fermentation Tanks

Increasing your fermentation capacity can be the most efficient and cost-effective means of increasing your brewing capacity! We have AISI 304-316 stainless steel tanks ranging in sizes from 50L - 50000L to suit all processing requirements.


Expanding your brewery or just want to get creative with flavours? Talk to our sales team today for a tank solution ready to support your business

contact us